Dont Hurt Me
Dec 11, 08:33 AM
Original Quicksilver had a very poor cooling solution with not much in the way of airflow. The original fan blew out if not mistaken. But that makes little sense in my view. I would have that fan sucking cool air from outside and blowing it across that sink into the system. Even open up a few of those holes on the back with a drill if you must its what i did. The big fan above the hard disc moves air to the outside of the unit. Also i dont know how you feel about this but i have notice manufactors are sloppy and stingy when applying the silicone compound between the cpu & sink. Make sure that CPU is coated 100% before mounting the heat sink. Also Quicksilver came with 2 fan guards on the power supply. One on the unit and one on the case. Remove one of these guards for even better flow of air. For example i had a 1.4 Merc extreme that would run all day at 1.47 after i made these cooling mods. quicksilver for the most part baths the componets in other componets heat and then sends that air across the sink out the system. Reverse that for better cooling. good luck.
vincenz
Feb 23, 06:29 PM
Don't know much about judging photography, but from an amateur viewer, they look quite decent.
jav6454
Mar 31, 12:21 PM
Fox News looses viewers? I am not surprised...
>mon visage
>mon visage
seek3r
Apr 25, 10:56 PM
The only applications that might use this are military applications. Which are most likely classified applications. But in short, no, a normal application wouldn't use it. ;)
In my line of work there are a *lot* of Apps that will happily gobble that CPU power, memory, or both. NAMD (http://www.ks.uiuc.edu/Research/namd/) will eat the CPU and ask for more, as will portions of Amber (http://ambermd.org/). NWChem (http://www.nwchem-sw.org/index.php/Main_Page) is another hog there, etc.
(Of course I don't *usually* run these local, the system I just ran a NAMD job on is a "small" cluster of 2u dell boxes with 4-way 12 core AMDs and 2GB/core for 48 core/96GB Mem per machine, 14 nodes total, but I do run them local for testing and small jobs...)
Not normal usage for most perhaps perhaps, but not military, and not out of line for use on a "pro" machine....
In my line of work there are a *lot* of Apps that will happily gobble that CPU power, memory, or both. NAMD (http://www.ks.uiuc.edu/Research/namd/) will eat the CPU and ask for more, as will portions of Amber (http://ambermd.org/). NWChem (http://www.nwchem-sw.org/index.php/Main_Page) is another hog there, etc.
(Of course I don't *usually* run these local, the system I just ran a NAMD job on is a "small" cluster of 2u dell boxes with 4-way 12 core AMDs and 2GB/core for 48 core/96GB Mem per machine, 14 nodes total, but I do run them local for testing and small jobs...)
Not normal usage for most perhaps perhaps, but not military, and not out of line for use on a "pro" machine....
more...
cjc343
Nov 8, 08:52 AM
Earthlink's my ISP... I can't find anything in the EULA about serving files... but I've had lots of problems with them that they ignore/blame on someone else...
LouieSamman
Apr 30, 01:12 AM
Am I missing something? I get an email everytime someone replies to a thread I've posted in.
Now what would be nice is if that email had a link to the thread on the regular site and for the mobile site.
No an email of someone replying to a comment you left in a thread. Not someone who replies to a thread.
For example you read a thread someone posted and you have a question. So you leave your question within that persons thread. There would be people who would quote your question and answer it. You then get a email of those people who quoted and answered your question.
Being subscribed to a thread that you left a question on is too much work to always look at all the replies people left to the thread as your waiting for a reply to your comment.
Sometimes I don't want to waste my time reading the hundreds of comments after my comment and most likely interested only if someone quoted my comment.
So what would be nice is an option, when subscribing to a thread, to either receive an email every time someone comments to a thread OR someone quoting your comment and replying to it..
Now what would be nice is if that email had a link to the thread on the regular site and for the mobile site.
No an email of someone replying to a comment you left in a thread. Not someone who replies to a thread.
For example you read a thread someone posted and you have a question. So you leave your question within that persons thread. There would be people who would quote your question and answer it. You then get a email of those people who quoted and answered your question.
Being subscribed to a thread that you left a question on is too much work to always look at all the replies people left to the thread as your waiting for a reply to your comment.
Sometimes I don't want to waste my time reading the hundreds of comments after my comment and most likely interested only if someone quoted my comment.
So what would be nice is an option, when subscribing to a thread, to either receive an email every time someone comments to a thread OR someone quoting your comment and replying to it..
more...
4JNA
Nov 18, 06:00 PM
ppc, intel, xscale, vax, big endian.... hell, i don't care! load it on anything that will still turn on! we are getting killed, and seeing the daily output line FINALLY start to trend up is a wonderful thing!!!
congrats on the amazing output '64 ;)
welcome back to all the 'took the summer off' people...
...I just completed my first WU for Team MacRumors!
welcome!
congrats on the amazing output '64 ;)
welcome back to all the 'took the summer off' people...
...I just completed my first WU for Team MacRumors!
welcome!
jessica.
Feb 14, 07:31 PM
Cheap Trick at Budokan
Foo Fighters Live at Wembley Stadium
Cheap Trick: Sgt. Pepper Live (really not a "concert" per se)
KISS: The Lost 1976 Concert
Just to name a few.
Foo Fighters Live at Wembley Stadium
Cheap Trick: Sgt. Pepper Live (really not a "concert" per se)
KISS: The Lost 1976 Concert
Just to name a few.
more...
point665
Oct 26, 09:04 AM
I'll probably be there around 6 with a friend to buy Leopard cause my up-to-date still hasnt shipped @#@%@#!@
russed
Nov 16, 07:41 AM
I also have a set of JBL Creatures, but I wouldn't say the sound quality is really good. They are very good for the price, and I do love them to bits but they don't cope very well at high volume (like, Maximum).
They are fine for a bedroom, but I don't think they have enough 'in hand' to be loud in a large room. I am fussy, but I get some distortion when listening to them very loud. Great for gaming and mp3, but not for listening to classical music or hard-house up high.
They look superb, though :)
i would disagree but i feel the quality is very good for what you are paying for. i have never managed to get them to full volume as it was so loud i couldnt stand it! i do not think there is any distortion at pretty loud listening when listening to heavy rock, metal, dance and cheese! i think a lot of it comes down to the quality of what you are playing (all my mp3's are 192kbps aac) and also the set up of the equilizer on itunes. if you get it correct it sounds amazing, even on my pb speakers!
They are fine for a bedroom, but I don't think they have enough 'in hand' to be loud in a large room. I am fussy, but I get some distortion when listening to them very loud. Great for gaming and mp3, but not for listening to classical music or hard-house up high.
They look superb, though :)
i would disagree but i feel the quality is very good for what you are paying for. i have never managed to get them to full volume as it was so loud i couldnt stand it! i do not think there is any distortion at pretty loud listening when listening to heavy rock, metal, dance and cheese! i think a lot of it comes down to the quality of what you are playing (all my mp3's are 192kbps aac) and also the set up of the equilizer on itunes. if you get it correct it sounds amazing, even on my pb speakers!
more...
Silent Assassin
Mar 28, 12:25 PM
And only on iPad 1 NOT iPad 2, correct?
I'm not 100% sure on that..
I'm not 100% sure on that..
flosseR
Mar 21, 02:26 AM
Hi, thanks for the responses.about the canon lenses: I use Nikon so my lenses are all black. In terms of throwing the lenses around, well I do go on travel and I do go out in the woods etc. so yes my lenses do see action and they do get small hits here and there. My old sigma 70-200 had some scratches because it fell on the ground. So yes I have seen damage to the lenses in that respect.
In terms of the lens coats, they look like they fit well but I have seen professional photographers using self adhesive tape as a layer of protection. So no glue residue left as you take it off but still that looks even worse than the lens coat :)
I'll have to re-think what I will do....
In terms of the lens coats, they look like they fit well but I have seen professional photographers using self adhesive tape as a layer of protection. So no glue residue left as you take it off but still that looks even worse than the lens coat :)
I'll have to re-think what I will do....
more...
HawaiiMacAddict
Mar 13, 12:43 PM
yes, that's exactly what I did. I took an external 1TB WD small form factor drive (it houses a 2.5" HDD), created 200GB and 800GB partitions, then installed Lion on the smaller one. I still haven't begun to use the larger partition, however :D
BTW, has anyone gotten iStat Menus 2.0 running on Lion? I can't seem to get it working correctly. It downloads the sensors, but when I click on any of them in the preference pane, I'm told that they can't be loaded.
BTW, has anyone gotten iStat Menus 2.0 running on Lion? I can't seem to get it working correctly. It downloads the sensors, but when I click on any of them in the preference pane, I'm told that they can't be loaded.
Applejuiced
Feb 9, 02:06 PM
What good is doing it all at the same time if you can't keep the call connected?;)
Hey guess what, I can make calls fine on my AT&T phone.
Keep believing the VZ hype and thinking only verizon customers can actually make phone calls:D
Hey guess what, I can make calls fine on my AT&T phone.
Keep believing the VZ hype and thinking only verizon customers can actually make phone calls:D
more...
flopticalcube
Apr 21, 12:17 PM
Oooh, a YouTube tag.
Sweet! Honey Badger, badass!
Sweet! Honey Badger, badass!
EricNau
Dec 21, 08:22 PM
A lot of electronics have a funny smell when you first get them. Is the smell getting better or worse?
more...
spillproof
Jul 23, 08:59 PM
So, I guess Windows needs to update their XP background then, huh?
wchong
Jun 10, 09:37 AM
I would have thought that Apple still cared about making computers.
Guess we were both wrong.
ever since ipod hit the market they have been more concerned with that market. most of their revenue (correct me if i'm wrong) comes from ipod sales.
Guess we were both wrong.
ever since ipod hit the market they have been more concerned with that market. most of their revenue (correct me if i'm wrong) comes from ipod sales.
dscuber9000
Mar 1, 07:56 PM
Can someone make rainbow "Don't Tread On Me" flags? I think it would be a brilliant way to show Republican hypocrisy on their calls for smaller government, yet they think government should regulate who and who cannot marry based on, well, nothing.
sparkleytone
Sep 17, 06:57 PM
now this is sexy. (http://www.applele.com)
http://www.applele.com/hiphone_r04c.jpg
i would buy one in a heartbeat. also....the future moto phones that have been liked look nice...esp the v600. pic links have already been taken down :(
http://www.applele.com/hiphone_r04c.jpg
i would buy one in a heartbeat. also....the future moto phones that have been liked look nice...esp the v600. pic links have already been taken down :(
wrldwzrd89
Oct 21, 07:12 AM
You missed the real story -- in the release notes Apple explain that they're deprecating the Apple maintained version of Java:
http://www.infoq.com/news/2010/10/apple-deprecates-java
Apple have provided a mechanism for installing 3rd party JDKs (in particular OpenJDK), but it likely won't work with current versions of Java IDEs (Netbeans, Eclipse etc) until they're updated to work with the new paths.
I wonder if this is anything to do with Oralce?
No. It's not related to any dislike between Apple and Oracle. I believe it was timed purposely to keep Java applications out of the new Mac App Store.
More importantly, is Java going to die on OS X? If OpenJDK or Soylatte don't pick it up then is all lost?
Don't forget the IcedTea project. This is related to OpenJDK, and already has a working Mac implementation.
http://www.infoq.com/news/2010/10/apple-deprecates-java
Apple have provided a mechanism for installing 3rd party JDKs (in particular OpenJDK), but it likely won't work with current versions of Java IDEs (Netbeans, Eclipse etc) until they're updated to work with the new paths.
I wonder if this is anything to do with Oralce?
No. It's not related to any dislike between Apple and Oracle. I believe it was timed purposely to keep Java applications out of the new Mac App Store.
More importantly, is Java going to die on OS X? If OpenJDK or Soylatte don't pick it up then is all lost?
Don't forget the IcedTea project. This is related to OpenJDK, and already has a working Mac implementation.
mchalebk
Feb 4, 01:22 PM
Why not just use Migration Assistant? I used that to transition my wife from an old PowerBook G4 to a MacMini and it was really simple. There were a few quirks since the other was such an old computer using a PowerPC chip, but it made the whole process really simple. I'm now kicking myself for not doing that when I bought my MacPro back in 2009.
galimk
Apr 23, 05:30 PM
Look in your book for exactly what you're supposed to use for #import. You may have made a mistake.
I'm not sure, but #import <Fraction.h> seems wrong to me. If Fraction.h were a system-provided class, it would be correct. But it's a developer-created class, so #import "Fraction.h" seems more sensible to me, and is what I've always used when referring to class headers I create.
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
I'm not sure, but #import <Fraction.h> seems wrong to me. If Fraction.h were a system-provided class, it would be correct. But it's a developer-created class, so #import "Fraction.h" seems more sensible to me, and is what I've always used when referring to class headers I create.
Post your code.
No one with any programming experience would believe anyone (beginner or experienced) who says there are no compilation errors, unless the code has actually been compiled without errors. You may be right, but we need to see the evidence of the compiler.
Thanks! Your answer helped. So now I know that <**> are only for system provided classes. I used quotes for Fraction.h and it worked.
The example that I used had everything dumped in the main .m file along with the main function.
entatlrg
Apr 25, 06:41 PM
I agree completely. Enjoy your new Birthday gift.
No one but Apple knows a date, what SB will or won't bring or anything at this point.
To many uncertainties ... now the speed is good, so is the heat and fan noise ... best we've ever seen on the Airs.
Have fun.
No one but Apple knows a date, what SB will or won't bring or anything at this point.
To many uncertainties ... now the speed is good, so is the heat and fan noise ... best we've ever seen on the Airs.
Have fun.
0 comments:
Post a Comment