natrajs
05-17 10:03 PM
Guys, I received THE magic email also this week. Card Production ordered on May 14th. HUGE Relief!!!
I just wanted to pass on a few tips. These steps may or not have expedited my processing but the timing sure was suspiciously fortuitous:
a) On May 7th, since the NSC I-485 processing date was more than 30 days past my RD, my lawyer sent an official email to NSC asking them for an update on my application. According to my lawyer, CIS is obligated to reply within 45 days and in most cases instead of them saying that this specific application falls outside their processing dates, they just approve the application. Of course, your case has to be approvable (PD has to be current etc)
b) On May 9th, I set up an Infopass appointment where the IO told me that my case was in transit from a different service center back to NSC! She also told me both our NCs were complete.
c) My lawyer was also getting ready to file another round of EAD/AP applications which, according to her, draws CIS's attention to the fact that this application is ready for processing and falling outside the average time range.
Maybe the combination of inquiry email and Infopass helped moved the case or maybe it did not. Probably does not hurt to try at least once and, of course, you don't want to overdo it and burden the system.
Just my $0.02. Hope it helps. Best of luck with your applications. I learned a ton from these forums and (if nothing else) out of sheer habit, will be coming back all the time. Will try my best to help out IV where I can. Cheers!
Congrats and Best Wishes
I just wanted to pass on a few tips. These steps may or not have expedited my processing but the timing sure was suspiciously fortuitous:
a) On May 7th, since the NSC I-485 processing date was more than 30 days past my RD, my lawyer sent an official email to NSC asking them for an update on my application. According to my lawyer, CIS is obligated to reply within 45 days and in most cases instead of them saying that this specific application falls outside their processing dates, they just approve the application. Of course, your case has to be approvable (PD has to be current etc)
b) On May 9th, I set up an Infopass appointment where the IO told me that my case was in transit from a different service center back to NSC! She also told me both our NCs were complete.
c) My lawyer was also getting ready to file another round of EAD/AP applications which, according to her, draws CIS's attention to the fact that this application is ready for processing and falling outside the average time range.
Maybe the combination of inquiry email and Infopass helped moved the case or maybe it did not. Probably does not hurt to try at least once and, of course, you don't want to overdo it and burden the system.
Just my $0.02. Hope it helps. Best of luck with your applications. I learned a ton from these forums and (if nothing else) out of sheer habit, will be coming back all the time. Will try my best to help out IV where I can. Cheers!
Congrats and Best Wishes
wallpaper formed at convergent plate
gcdreamer05
02-03 01:53 PM
fairy angel, there is a very kind and helpful person called "angry white male" a.k.a "Matt krusse" a.k.a "curry lover", please PM/Phone/Fax/Email this person and he will help you....
He may even get you a job....... :p
He may even get you a job....... :p
karthikdurai
02-02 12:52 AM
Hi Sunny1000...Thanks for your reply and I have moved down a day and going to get in on Jun24th, that will get me 3 days...Just to be safe. I have read other threads with immig.voice and most of them are saying technically they can get in on last /Final Day of the Validity.
Any body any additions to this...if you can please register your thoughts.
Regards
Any body any additions to this...if you can please register your thoughts.
Regards
2011 Plate boundaries are of three
3ZS
May 11th, 2006, 07:55 PM
Hi -
Thanks for the quick reply. I really appreciate it.
Ill give sigma a call in the am.
I tried nikon but they told me straight up they dont support 3rd party lens'
Sometimes Sigma lenses can have issues with different cameras because Nikon makes subtle changes to the way the camera talks to the lenses - changes that work fine with Nikon lenses but on occasion cause havok with third party lenses. If you contact Sigma, they should be able to tell you if an incompatibility between the lens and camera is indeed what is happening, and if so, they should be able to upgrade the processor in the lens (I'm not sure, but they may even do this at no cost).
If you compare the Nikon 18-50mm with the Sigma 18-50mm (your Sigma is the f/2.8 model, right?), then I'm guessing that the Sigma will be better. Compared with the more expensive Nikon 18-70mm zoom that is sold as a kit with the D70s, they're probably about the same (bear in mind that I don't really know, since I've only used the Nikon 18-70 personally). I don't abuse my lenses, so what the lens mount is made of matters relatively little. In many cases a metal lens mount may be a sign of better quality in other areas including image quality, so the dealer wasn't entirely full of it, but I would be wary if someone tried to sell me something other than what I wanted for that reason alone.
Thanks for the quick reply. I really appreciate it.
Ill give sigma a call in the am.
I tried nikon but they told me straight up they dont support 3rd party lens'
Sometimes Sigma lenses can have issues with different cameras because Nikon makes subtle changes to the way the camera talks to the lenses - changes that work fine with Nikon lenses but on occasion cause havok with third party lenses. If you contact Sigma, they should be able to tell you if an incompatibility between the lens and camera is indeed what is happening, and if so, they should be able to upgrade the processor in the lens (I'm not sure, but they may even do this at no cost).
If you compare the Nikon 18-50mm with the Sigma 18-50mm (your Sigma is the f/2.8 model, right?), then I'm guessing that the Sigma will be better. Compared with the more expensive Nikon 18-70mm zoom that is sold as a kit with the D70s, they're probably about the same (bear in mind that I don't really know, since I've only used the Nikon 18-70 personally). I don't abuse my lenses, so what the lens mount is made of matters relatively little. In many cases a metal lens mount may be a sign of better quality in other areas including image quality, so the dealer wasn't entirely full of it, but I would be wary if someone tried to sell me something other than what I wanted for that reason alone.
more...
malibuguy007
10-01 07:49 PM
Please help with the contribution drive
http://immigrationvoice.org/forum/showthread.php?t=21817
http://immigrationvoice.org/forum/showthread.php?t=21817
fatjoe
09-06 02:06 PM
I called USCIS and I was told that, in (mid) July, NSC and TSC were the only Service centers receiving applns. USCIS has received enormous # of applications in and around mid-July and they are stagnant somewhere in the Service Centers. Applications are not moved from NSC to TSC. They are in the service center where they were sent.
They may be in the system by the end of this month. I guess we'll have to wait, only time will answer.
They may be in the system by the end of this month. I guess we'll have to wait, only time will answer.
more...
willgetgc2005
03-22 07:37 PM
Sent to my Attorney.
2010 Plate Tectonics
gc_bulgaria
10-23 08:13 PM
EAD came with FP notice on 9/29. Received FP today.
No LUDs since 9/19 and AP status still says "Pending"
No LUDs since 9/19 and AP status still says "Pending"
more...
wandmaker
10-07 07:36 PM
My wife is in a similar situation. I-94 validity matches passport expiry (Dec 2008) , but H1 visa stamp is until Mar 2010. She has a new passport, but we are not sure if she will be out of status if she does not get a new I-94 and stays in the country beyond Dec 2008.
Get your I-94 corrected - BTW, staying beyond I-94 date is unlawful and you will be barred from entering US.
Get your I-94 corrected - BTW, staying beyond I-94 date is unlawful and you will be barred from entering US.
hair convergent plate boundary?
immig4me
04-19 01:21 PM
Travel Advisory: Delays Due to Icelandic Volcano Eruption
(04/17/2010) If you or someone you know is stranded in the United States because of the airport closures in Europe due to the Icelandic volcano eruption and is about to exceed their authorized stay as a direct result of these closures, there are two avenues for relief:
If the traveler is at the airport and traveling under the Visa Waiver Program (VWP) and unable to depart timely, as a result of airport closures or flight delays/cancellations, travelers should:
1. Contact the U.S. Customs and Border Protection (CBP) office at the airport or;
2. Contact the U.S. Citizenship and Immigration Services (USCIS) office.
Both agencies have provided staff with guidance on the applicable legal authorities under the VWP in circumstances such as these.
If persons are traveling under a visa, they should contact the nearest USCIS office and follow the instructions at the following link: ( USCIS - Extend My Stay )
While this link recommends initiating the process 45 days in advance, USCIS is providing guidance on how to handle these cases over this weekend.
-- from IV advisor Greg Siskind
(04/17/2010) If you or someone you know is stranded in the United States because of the airport closures in Europe due to the Icelandic volcano eruption and is about to exceed their authorized stay as a direct result of these closures, there are two avenues for relief:
If the traveler is at the airport and traveling under the Visa Waiver Program (VWP) and unable to depart timely, as a result of airport closures or flight delays/cancellations, travelers should:
1. Contact the U.S. Customs and Border Protection (CBP) office at the airport or;
2. Contact the U.S. Citizenship and Immigration Services (USCIS) office.
Both agencies have provided staff with guidance on the applicable legal authorities under the VWP in circumstances such as these.
If persons are traveling under a visa, they should contact the nearest USCIS office and follow the instructions at the following link: ( USCIS - Extend My Stay )
While this link recommends initiating the process 45 days in advance, USCIS is providing guidance on how to handle these cases over this weekend.
-- from IV advisor Greg Siskind
more...
chanduv23
07-05 04:25 PM
This has been discussed, we can't help.
It takes time for people to come on same page.
Lot of lawyers have conference calls with their clients - discuss what "their clients" must do.
One good thing is a lot of our members under the IV umbrella have the zeal to do something. Looking at the Munnabhai threads etc...
It is a matter of time before we get organized. IV core is working hard on various aspects.
Before anyone does anything under the IV umbrella - please contact sertasheep or pappu or macaca.
It takes time for people to come on same page.
Lot of lawyers have conference calls with their clients - discuss what "their clients" must do.
One good thing is a lot of our members under the IV umbrella have the zeal to do something. Looking at the Munnabhai threads etc...
It is a matter of time before we get organized. IV core is working hard on various aspects.
Before anyone does anything under the IV umbrella - please contact sertasheep or pappu or macaca.
hot Types of plate boundaries
chandra_mb
03-12 12:52 AM
................
Also, if one one "qualifies" with all the requirements he or she can apply based on the TIN #. The board must be informed that a TIN is used and will need to be updated with SSN when you recieve one.
Thanks a lot !!. I am assuming TIN# is the ITIN number (used for tax filing) ? Also, if you dont mind, can you please let me know which state board accepted the ITIN# ? We are planning for NJ or CA.
Also, if one one "qualifies" with all the requirements he or she can apply based on the TIN #. The board must be informed that a TIN is used and will need to be updated with SSN when you recieve one.
Thanks a lot !!. I am assuming TIN# is the ITIN number (used for tax filing) ? Also, if you dont mind, can you please let me know which state board accepted the ITIN# ? We are planning for NJ or CA.
more...
house convergent plate boundaries. convergent, transform and; convergent, transform and. Small White Car. Apr 12, 09:21 PM. Which was understandable back in
eadguru
11-02 12:59 PM
I got the same queries guys.
i think most of vermont transferred applications are getting it.
i will also send color copies of all the documents mentined by you.
how do you have i 94 for all h1's. i just have my current one. rest all i gave it to immigration while departing to india.
appreciate any responses.
thanks,
srikanth
Sent the all the existing I 94's and Passport.
i think most of vermont transferred applications are getting it.
i will also send color copies of all the documents mentined by you.
how do you have i 94 for all h1's. i just have my current one. rest all i gave it to immigration while departing to india.
appreciate any responses.
thanks,
srikanth
Sent the all the existing I 94's and Passport.
tattoo convergent plate boundaries.
snathan
05-15 10:49 AM
Hi Pappu,
How about 10000+ people sing a single letter and send it to every congressman/woman or senator. When you ask people to send letter to all congressman/woman they won�t. But i believe they wont hesitate to just sign one letter. Let me know if it�s useful
How about 10000+ people sing a single letter and send it to every congressman/woman or senator. When you ask people to send letter to all congressman/woman they won�t. But i believe they wont hesitate to just sign one letter. Let me know if it�s useful
more...
pictures occurs at convergent plate
immi_enthu
08-06 12:22 PM
12 calendar days. My I 140 was originally applied on 01/08/2007 upgraded to premium on 06/26/2007 there was a RFE ability to pay , reponse for RFE received on 07/26/2007. we called 18663155718 today, the IO officer said my case is approved today. online status still says it's pending.
Unfortunately the premium service on I 140 is not reinstated yet. Note I upgraded before (07/01/2007)it was suspended . Sorry for the confusion
Unfortunately the premium service on I 140 is not reinstated yet. Note I upgraded before (07/01/2007)it was suspended . Sorry for the confusion
dresses convergent plate boundaries. convergent plate boundaries. convergent plate boundaries. meepm00pmeep. Oct 23, 06:49 AM. i#39;d like to see what#39;s inside the
masti_Gai
10-25 12:22 PM
am waitin since May thrid week. :(
am not gonna give them a single penny
its almost five and half months
lemme see how long they will take to take a decision on ma case.:confused:
not worth spendin ma hard earned money when my PD isn't current.:rolleyes:
am not gonna give them a single penny
its almost five and half months
lemme see how long they will take to take a decision on ma case.:confused:
not worth spendin ma hard earned money when my PD isn't current.:rolleyes:
more...
makeup convergent plate boundaries. At convergent plate boundaries; At convergent plate boundaries. jgould. Feb 19, 08:09 PM. Hasn#39;t changed too much this time
Mak Valley
01-29 01:15 AM
swarm all the way
girlfriend Convergent plate boundaries
xgoogle
06-24 08:47 AM
You are saying I can leave the job and still be able to renew her EAD and AP every yr ? Also her I-485 will still be valid ?
hairstyles convergent plate boundaries. Convergent Plate Boundaries; Convergent Plate Boundaries. MBX. Jan 12, 11:22 AM. I figured out the secret air message!
140jibjab
01-11 11:06 AM
When you apply for H4 for the new wife. Make sure you take the follwoing:
1. Divorce Decree.
2. New Marraige registration(India Marraige Registration). Take the Marraige certificate and the Copy of the Application(Application you provide at the local authority to get your new marraige registered). Also make sure you Check the Divorced in the application. US consulate wants to make sure you have given the right info to the Local authorities).
3. Based on your H1, your new wife will get her H4 stamped.(been through it so it works like a charm).
All the best
Thank you so much...
What is the H4 Process for new wife? will she be given the H4 Visa with no issues in us consulates in India???
1. Divorce Decree.
2. New Marraige registration(India Marraige Registration). Take the Marraige certificate and the Copy of the Application(Application you provide at the local authority to get your new marraige registered). Also make sure you Check the Divorced in the application. US consulate wants to make sure you have given the right info to the Local authorities).
3. Based on your H1, your new wife will get her H4 stamped.(been through it so it works like a charm).
All the best
Thank you so much...
What is the H4 Process for new wife? will she be given the H4 Visa with no issues in us consulates in India???
p_aluri
08-03 06:55 PM
Yep! There is a relation between 485 and H1-B extension after 6 years limit.If your AOS date is current, You only get one year increment else three years extension upon I-140 approval.
Please contact an Attorney for clarification.
I dont think the three year extension has anything to do with 485. If your 140 is approved you get 3 years if there is no visa number is available for you. No need to be U.
Please contact an Attorney for clarification.
I dont think the three year extension has anything to do with 485. If your 140 is approved you get 3 years if there is no visa number is available for you. No need to be U.
bsbawa10
06-11 08:23 PM
Sorry, for this dump question, but is Fp done very year until you get your gc ?
0 comments:
Post a Comment