Macky-Mac
Apr 20, 07:06 PM
....And since I'm not moving in for months, should I wait until what, a week before moving in to pay them the security and rent?
You're four months away from wanting to actually move in??? I think you're looking to early.
I can't imagine any landlord holding an apartment that long without your paying for all the time you wont be living there
You're four months away from wanting to actually move in??? I think you're looking to early.
I can't imagine any landlord holding an apartment that long without your paying for all the time you wont be living there
Over Achiever
Sep 30, 08:14 AM
Interesting...the first pic like arn said was already discussed. As for the second pic...maybe the ti will get a radeon 9000. Will it be 32 MB or 64 MB...i'm hopin' 64 MB. Depends on whether the next update is october or beyond...
copykris
Oct 12, 06:26 PM
Amoeba is an awful place to buy used CDs - any location.
It's fine for vinyl and even new CDs releases, but the selection and prices are superior at any of the online places mentioned above - eBay, Amazon, Half.com and even SecondSpin.
i would disagree with this --i've bought a good few of used cd's at amoeba and have never been disappointed
It's fine for vinyl and even new CDs releases, but the selection and prices are superior at any of the online places mentioned above - eBay, Amazon, Half.com and even SecondSpin.
i would disagree with this --i've bought a good few of used cd's at amoeba and have never been disappointed
mnkeybsness
Nov 8, 04:37 PM
STAY AWAY FROM PHPBB!
Sorry to yell, but I built macthemesforums.net (http://macthemesforums.net) with phpbb and we all have been regretting it since about 3 months after the site launched. Security holes were the first major issue that we encountered... and now we have incredibly slow loading times and it is very hard to upgrade the software since we have made so many hacks to the default installation.
If you want lightweight and super fast, try PunBB (http://punbb.org).
If you want a powerful board with good support, use vBulleting or Invision Powerboard.
Sorry to yell, but I built macthemesforums.net (http://macthemesforums.net) with phpbb and we all have been regretting it since about 3 months after the site launched. Security holes were the first major issue that we encountered... and now we have incredibly slow loading times and it is very hard to upgrade the software since we have made so many hacks to the default installation.
If you want lightweight and super fast, try PunBB (http://punbb.org).
If you want a powerful board with good support, use vBulleting or Invision Powerboard.
more...
coolbreeze
Jan 10, 07:33 PM
They probably saw a large slowdown in sales b/c of defectors to google reader, etc, etc. Now, they are just looking to leverage their user base and get it installed on as many Macs as possible.
Just my guess.
Just my guess.
jackerin
Jan 15, 04:49 PM
When you access the track editor there should be a checkbox to follow tempo and pitch, see if it's checked, if so uncheck it.
more...
macEfan
Dec 8, 07:33 PM
I'll take the motherboard, fan, power supply, and ethernet card. What kind of 30-pin are you looking for? I may have some. What kinda of computer do you need it for?
I am looking for 30 pin memory for either a LCII or a mac IICi thanks! could you PM me your zip code so I can figure out shipping? thanks
I am looking for 30 pin memory for either a LCII or a mac IICi thanks! could you PM me your zip code so I can figure out shipping? thanks
wolrabn
May 1, 02:21 AM
Hi guys,
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
wondered if someone can help at all. Have searched the net quite extensively with this one - I'm now under the assumption the logic board will need replacing unless anyone can tell me otherwise?
I'll list as much info as I can if you need anything else let me know.
Got an iPhone 3g from a friend that only powers in DFU mode when connected to the mac/pc.
Blank screen permanently on.
All restores return error code 6.
2 different usb cables tried, tested on OSX 10.6.7, windows 7 + sp1 and xp sp3 (xp is virtual).
I do not know what version firmware was previously on it.
I have tried to restore official 2.0.1, 2.1, 3.1.2, 3.1.3, 4.1, 4.2
I have tried custom firmware on 3.1.3, 2.1, 4.1
I have attempted jailbreak with redsn0w, pwnagetool, ziphone
redsn0w seems to work then instead of booting to springboard the iphone just reverts back into dfu.
I have checked the logs of these restores and noticed this:
Error setting variable - 'boot-args': (iokit/common) general error
error setting 'boot-args' to '': 1
to which a little googling led me to a possibility with logic board.
I have tried using iRecovery but to be honest unsure where to go with it i also tried TinyUmberella which attempted to fix recovery and the phone didnt reboot. just stayed in dfu.
Although this is in DFU i have kept making a point of making sure i manually place it into DFU when attempting restores just to make sure its not in recovery mode (though i doubt it ever has been as it has never shown the 'connect to itunes' message- just always a blank screen unless recovering.
Recovery for all firmware seems to get 99% of the way before showing error 6.
Does anyone know a way of fixing this issue or do I give up and sell for spares/repair?
Thanks
more...
After G
Sep 15, 08:20 PM
Haven't had experience with either kb; I heard mechanical keys are better for typing. Still, if you are looking for a nice keyboard, you could try the Kensington Slimtype. It's nice, and doesn't cost a lot.
Sorry for the short post; don't know what else I could say.
Sorry for the short post; don't know what else I could say.
twoodcc
Feb 19, 05:24 PM
so i hate to bring back an old thread, but i'm still wondering what kind of numbers people are getting folding with an i7-860? i've read some numbers online, and they seem to be less than the 920s
more...
bobsbarricades
Apr 24, 03:54 PM
your post is confusing.
you say it worked fine, but then it sounds like your upset it doesn't have audio.
what mac do you have?
how to hook it up depends on what kind, and how old it is.
if you're not sure how old it is, go to the :apple: menu, about this mac, more info.
then on the the main hardware page, there is a Model Identifier should say something followed by a couple numbers, like "Macmini4,1"
give us that, and we can tell you what you need.
thanks for the response!
Sorry for the confusion. I've got a 2k7 MBP with the dvi out on the right. Well that plugs easy enough and get picture working but no audio (because dvi doesn't transfer audio). So I was going to go from my headphone jack to the tv...but can't get any sound at all.
you say it worked fine, but then it sounds like your upset it doesn't have audio.
what mac do you have?
how to hook it up depends on what kind, and how old it is.
if you're not sure how old it is, go to the :apple: menu, about this mac, more info.
then on the the main hardware page, there is a Model Identifier should say something followed by a couple numbers, like "Macmini4,1"
give us that, and we can tell you what you need.
thanks for the response!
Sorry for the confusion. I've got a 2k7 MBP with the dvi out on the right. Well that plugs easy enough and get picture working but no audio (because dvi doesn't transfer audio). So I was going to go from my headphone jack to the tv...but can't get any sound at all.
Cox Orange
Apr 15, 01:39 PM
Thanks to both of you.
to get your VHS source onto your computer it would have to be digitized first. So either you digitized the video or someone did it for you. How this was done determines the base quality of your DIGITAL source. It can't be better than your source, but it can be converted to a more useful or less useful digital format (h.264 = more / mpeg2 = less for example).
Ah, I'm stupid. Actually I knew this, do not know how I forgot it when explaining what I am asking. I forgot that I know, that it is the hooked up hardware that changes the source from analogue to digital. Why else should I use this type of thing here called "A/D-converter". (Btw, the A/D-converter I am using is ADVC-300 via firewire and some times EyeTV250 via USB).
I can't explain to myself why I mixed up the hardware's job with what the software does. :o:confused:
it seems your asking how imovie handles video import for various versions.
Yes, that's it.
...but i can tell your quoting some rather old versions ...
I am using Vers. 3 and 5, because I have two PPC-Macs, that I possess for a long time, but never had any need to use iMovie before. I use my Macs 5-6 years (from the day on they were bought). The next buy (first Intel) is actually due, but I am still procrastinating it, but decided to start saving my VHS to an external disk better now then later and so I use my PPC-Macs with the old versions of iMovie they came with.
Noise filtering would be a filter...that's a post process.... - in the software not the hardware, ok.
Have no idea what a "line time base" is.
ah, baseline time correction was the word I was searching for. ADVC uses TBC, EyeTV not. I thought Maybe iMovie does this too, on the fly.
In iMovieHD 5 you can choose that it saves the incoming material as mpeg4. I do not mean the converting to mpeg4 or whatever type after editing (chopping parts in between and all that stuff).
I thought the ADVC-300 changes the analogue one to DV and iMovie puts it in mpeg4.
After that I would cut/edit the film and convert it to h.264.
I choose to let iMovie5 record as DV, because I could not see the sense in capturing it as mpeg4, when I plan to convert it to h.264 afterwords.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online — probably best to just suck it and see.
Ok, thanks.
I am assuming this now, (right?): If I plan to save the films on an external disk and convert them to h.264 later, it does not affect the quality, if I use DV coming from iMovie2 or 5.
Example:
1. capture VHS in iMovie
2. save them to disk
3. forget about them
4. buy an Intel-Mac at the end of the year (because I do not want my PPC spend nights with converting DV to h.264
5. open DV file on external disk in mpegstreamclip(converter-app) on new Intel Mac, choose "convert to h.264", setting bitrate and everything I like.
It does not matter if iMovie2 saved it as DV or iMovie5 saved it as DV, right?
PS: I know, me using an ADVC-300 after my questions, sounds like a kid with one guitar lesson playing a Gibson guitar. :)
to get your VHS source onto your computer it would have to be digitized first. So either you digitized the video or someone did it for you. How this was done determines the base quality of your DIGITAL source. It can't be better than your source, but it can be converted to a more useful or less useful digital format (h.264 = more / mpeg2 = less for example).
Ah, I'm stupid. Actually I knew this, do not know how I forgot it when explaining what I am asking. I forgot that I know, that it is the hooked up hardware that changes the source from analogue to digital. Why else should I use this type of thing here called "A/D-converter". (Btw, the A/D-converter I am using is ADVC-300 via firewire and some times EyeTV250 via USB).
I can't explain to myself why I mixed up the hardware's job with what the software does. :o:confused:
it seems your asking how imovie handles video import for various versions.
Yes, that's it.
...but i can tell your quoting some rather old versions ...
I am using Vers. 3 and 5, because I have two PPC-Macs, that I possess for a long time, but never had any need to use iMovie before. I use my Macs 5-6 years (from the day on they were bought). The next buy (first Intel) is actually due, but I am still procrastinating it, but decided to start saving my VHS to an external disk better now then later and so I use my PPC-Macs with the old versions of iMovie they came with.
Noise filtering would be a filter...that's a post process.... - in the software not the hardware, ok.
Have no idea what a "line time base" is.
ah, baseline time correction was the word I was searching for. ADVC uses TBC, EyeTV not. I thought Maybe iMovie does this too, on the fly.
In iMovieHD 5 you can choose that it saves the incoming material as mpeg4. I do not mean the converting to mpeg4 or whatever type after editing (chopping parts in between and all that stuff).
I thought the ADVC-300 changes the analogue one to DV and iMovie puts it in mpeg4.
After that I would cut/edit the film and convert it to h.264.
I choose to let iMovie5 record as DV, because I could not see the sense in capturing it as mpeg4, when I plan to convert it to h.264 afterwords.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online — probably best to just suck it and see.
Ok, thanks.
I am assuming this now, (right?): If I plan to save the films on an external disk and convert them to h.264 later, it does not affect the quality, if I use DV coming from iMovie2 or 5.
Example:
1. capture VHS in iMovie
2. save them to disk
3. forget about them
4. buy an Intel-Mac at the end of the year (because I do not want my PPC spend nights with converting DV to h.264
5. open DV file on external disk in mpegstreamclip(converter-app) on new Intel Mac, choose "convert to h.264", setting bitrate and everything I like.
It does not matter if iMovie2 saved it as DV or iMovie5 saved it as DV, right?
PS: I know, me using an ADVC-300 after my questions, sounds like a kid with one guitar lesson playing a Gibson guitar. :)
more...
michaelrjohnson
Apr 4, 10:51 PM
unfortunately, i'm pretty sure it's just a typo...someday though!
arogge
Jul 11, 10:09 PM
Originally posted by simX
Keychain Access actually requires the full password.
Weird... I accessed my Keychain with the truncated password when I was prompted by OS X as a result of changing my password.
Keychain Access actually requires the full password.
Weird... I accessed my Keychain with the truncated password when I was prompted by OS X as a result of changing my password.
more...
stroked
Apr 22, 06:09 PM
I apologize if I may have violated the rules with regard to asking a question about selling an item, it's not may intention to come here to pawn something off.
As for my friend, we have known each other since kindergarten (now in our 30s) and I originally offered to give it to him for free but he insisted on paying a fair-market price.
I just sent you a friend request.
As for my friend, we have known each other since kindergarten (now in our 30s) and I originally offered to give it to him for free but he insisted on paying a fair-market price.
I just sent you a friend request.
tutiplain
Apr 10, 09:50 PM
Hi again,
more...
Slippers Size Girls 2/3
Slippers For Girls
slippers.Size: Girls
more...
SAdProZ
Nov 27, 05:08 PM
Are you trying to ftp to a windows box with firewall enabled, but not configure properly for ftp? That is exactly what happens.uh, i dunno...what do you mean by windows box? i do have firewall enabled, and i am uploading to a website of mine (www.sadproz.com)
joeyboyyy91
Apr 23, 02:23 PM
So does anyone else think apples next bluetooth keyboard should have backlit keys? and possibly black coloured keys, like macbook pro's etc, instead of white.
Is this possible?
What are your opinions - lets discuss.
Is this possible?
What are your opinions - lets discuss.
poobear
Mar 26, 11:31 AM
My mouse (Microsoft Basic Optical Mouse v2.0) show far less mouse acceleration in Lion compared to Snow Lion.
I haven't read anything about this so I guess it's something on my end? Or does other people get similar behavior in Lion?
I haven't read anything about this so I guess it's something on my end? Or does other people get similar behavior in Lion?
Joshuarocks
Apr 3, 12:04 AM
IIRC, the Quadro is the same as the 7800, but with a port for a stereo-3D headset.
I've got a 6600 in my PowerMac G5 and it's certainly whisper quiet since it doesn't have a fan. I'm considering an upgrade to an ATI X1900, though. I've got an X1900XT in my Mac Pro at work and I'm more than modestly pleased with it, but the 6600 is more than adequate for what I need at home.
So, the Quadro fx 4500 is noisy like the 7800 GT? I mean, this 7800 GT is noisy as noise is spelt: N O I S E!!
I've got a 6600 in my PowerMac G5 and it's certainly whisper quiet since it doesn't have a fan. I'm considering an upgrade to an ATI X1900, though. I've got an X1900XT in my Mac Pro at work and I'm more than modestly pleased with it, but the 6600 is more than adequate for what I need at home.
So, the Quadro fx 4500 is noisy like the 7800 GT? I mean, this 7800 GT is noisy as noise is spelt: N O I S E!!
balamw
Apr 24, 01:59 PM
Read http://whathaveyoutried.com and http://mikeash.com/getting_answers.html .
You are unlikely to get the answers you seek without giving us a lot more than you already have. Post any code you have tried that doesn't work. Post links to the Java code that you think does what you want, etc...
Especially if this sounds like homework, you need to at least try to solve it.
B
You are unlikely to get the answers you seek without giving us a lot more than you already have. Post any code you have tried that doesn't work. Post links to the Java code that you think does what you want, etc...
Especially if this sounds like homework, you need to at least try to solve it.
B
mthq
May 4, 06:14 AM
That shouldn't be the case as phone has her custom wallpaper and has still alarms are set. Phone is showing "iPhone is locked connect with iTunes" and after connecting through USB i get "iTunes could not connect to iPhone..." al below:
http://img269.imageshack.us/img269/2403/screenshot20110504at121.png (http://img269.imageshack.us/i/screenshot20110504at121.png/)
As I said I know the passcode but I can't put that in :(
http://img269.imageshack.us/img269/2403/screenshot20110504at121.png (http://img269.imageshack.us/i/screenshot20110504at121.png/)
As I said I know the passcode but I can't put that in :(
InuNacho
Oct 1, 01:40 AM
Hey everyone I'm not sure if this is the right section for this, so if it isn't please point me in the right direction.
Anyhow I recently "found" a Macintosh TV, did a fresh install of System 7.1, hooked up my Genesis and... it seems like I'm missing half the frames per second. Both RF and video in have the same problem.
I've changed the very limited options in both TV Setup and Monitors and I still have the same problem. Will installing 7.6 change anything or am I stuck missing half the frames?
EDIT: Ok it's not half the frames missing but it's still noticeable. Also is there a way to adjust the picture quality, the video in is extremely blurry with multicolored artifacts everywhere.
Anyhow I recently "found" a Macintosh TV, did a fresh install of System 7.1, hooked up my Genesis and... it seems like I'm missing half the frames per second. Both RF and video in have the same problem.
I've changed the very limited options in both TV Setup and Monitors and I still have the same problem. Will installing 7.6 change anything or am I stuck missing half the frames?
EDIT: Ok it's not half the frames missing but it's still noticeable. Also is there a way to adjust the picture quality, the video in is extremely blurry with multicolored artifacts everywhere.
Don Kosak
Nov 10, 01:30 PM
I expected the end of the year break.
When I heard the rumor about Thanksgiving, I was taken aback. With iOS 4.2 launching soon, and getting new features and bug fixes out to support the new OS, it would be rough on end-users and developers to take that week off.
I'm glad we'll still have access across Thanksgiving.
When I heard the rumor about Thanksgiving, I was taken aback. With iOS 4.2 launching soon, and getting new features and bug fixes out to support the new OS, it would be rough on end-users and developers to take that week off.
I'm glad we'll still have access across Thanksgiving.
0 comments:
Post a Comment